Flash flood modeling with the MARINE hydrological distributed model

International audienceFlash floods are characterized by their violence and the rapidity of their occurrence. Because these events are rare and unpredictable, but also fast and intense, their anticipation with sufficient lead time for warning and broadcasting is a primary subject of research. Because of the heterogeneities of the rain and of the behavior of the surface, spatially distributed hydrological models can lead to a better understanding of the processes and so on they can contribute to a better forecasting of flash flood. Our main goal here is to develop an operational and robust methodology for flash flood forecasting. This methodology should provide relevant data (information) about flood evolution on short time scales, and should be applicable even in locations where direct observations are sparse (e.g. absence of historical and modern rainfalls and streamflows in small mountainous watersheds). The flash flood forecast is obtained by the physically based, space-time distributed hydrological model "MARINE'' (Model of Anticipation of Runoff and INondations for Extreme events). This model is presented and tested in this paper for a real flash flood event. The model consists in two steps, or two components: the first component is a "basin'' flood module which generates flood runoff in the upstream part of the watershed, and the second component is the "stream network'' module, which propagates the flood in the main river and its subsidiaries. The basin flash flood generation model is a rainfall-runoff model that can integrate remotely sensed data. Surface hydraulics equations are solved with enough simplifying hypotheses to allow real time exploitation. The minimum data required by the model are: (i) the Digital Elevation Model, used to calculate slopes that generate runoff, it can be issued from satellite imagery (SPOT) or from French Geographical Institute (IGN); (ii) the rainfall data from meteorological radar, observed or anticipated by the French Meteorological Service (Météo France); and (iii) the spatially distributed soil and other surface properties viewed from space (land cover map from SPOT or LANDSAT, main rivers, ...). The stream flood propagation model simulates flood propagation in main rivers by solving 1-D Saint Venant equations. The data required for this part of the model are the river morphology, topography and roughness. The MARINE model has already been used previously for real time flash floods forecasting in the frame of the PACTES project on "forecasting and anticipation of floods with spatial techniques'' (funded by the CNES and the French Ministry of Research) concerning the catastrophic 1999 flash flood that occurred in the South of France. The main advantages of MARINE are its ability to run on insufficiently gauged basins (with the help of satellite information) and to run in an operational mode for real-time flood forecasting

Agency and responsibility over virtual movements controlled through different paradigms of brain−computer interface

Agency is the attribution of an action to the self and is a prerequisite for experiencing responsibility over its consequences. Here we investigated agency and responsibility by studying the control of movements of an embodied avatar, via brain computer interface (BCI) technology, in immersive virtual reality. After induction of virtual body ownership by visuomotor correlations, healthy participants performed a motor task with their virtual body. We compared the passive observation of the subject's ‘own’ virtual arm performing the task with (1) the control of the movement through activation of sensorimotor areas (motor imagery) and (2) the control of the movement through activation of visual areas (steady‐state visually evoked potentials). The latter two conditions were carried out using a brain–computer interface (BCI) and both shared the intention and the resulting action. We found that BCI‐control of movements engenders the sense of agency, which is strongest for sensorimotor areas activation. Furthermore, increased activity of sensorimotor areas, as measured using EEG, correlates with levels of agency and responsibility. We discuss the implications of these results for the neural basis of agency

Promoting the achievement of looked after children and young people in South Tyneside

As of March 2016, there were 70,440 children and young people in care in England. The number of looked after children has continued to increase steadily over the last eight years. Sixty per cent of these children are in care because of abuse or neglect and three-quarters are placed in foster care arrangements. Children and young people who are in or have experienced care remain one of the lowest performing groups in terms of educational outcomes. Last year, 14% of looked after children achieved five or more A*–C GCSEs or equivalent, including English and mathematics. As a consequence, they also experience poorer employment and health outcomes after leaving school compared to their peers. They are over-represented amongst the offender population and those who experience homelessness. However, research is emerging to show that children and young people in care can have very positive experiences of school and are supported effectively to reach their full potential academically and socially. The purpose of this report is to share practice in selected South Tyneside schools that is contributing to improved outcomes and school experiences for children and young people in care. In July 2015, the South Tyneside Virtual School (VS) collaborated with UCL Institute of Education to run their Promoting the Achievement of Looked After Children (PALAC) programme with seven schools in the local authority (LA). This report presents an account of the programme, including the activities undertaken by the participants and the outcomes of the programme to date for students in care and staff in the participating school

Promoting the achievement of looked after children and young people in South Tyneside

As of March 2017, there were 72, 670 children and young people in care in England. The number of looked after children has continued to increase steadily over the last eight years. Sixty per cent of these children are in care because of abuse or neglect and three-quarters are placed in foster care arrangements. Children and young people who are in or have experienced care remain one of the lowest performing groups in terms of educational outcomes. The average Attainment 8 score for children in care is 19.3 compared to 44.5 for non-looked after children and 19.3 for children in need. In 2017 there was an increase in the percentage of children in care achieving a pass in English and mathematics from 17.4% to 17.5% and also in entering EBacc. Care leavers can experience poorer employment and health outcomes after leaving school compared to their peers. They are over-represented amongst the offender population and those who experience homelessness. However, research is emerging to show that children and young people in care can have very positive experiences of school if they are supported effectively to reach their full potential academically and socially. The purpose of this report is to share practice in selected South Tyneside schools that is contributing to improved outcomes and school experiences for children and young people in care. In 2017, South Tyneside Virtual School (VS) collaborated with UCL Institute of Education to deliver a second programme of Promoting the Achievement of Looked after Children (PALAC) with five schools in the local authority (LA). This report presents an account of the programme, including the activities undertaken by the participants and the outcomes of the programme to date for pupils in care and staff in the participating schools

Inequalities in mortality of men by oral and pharyngeal cancer in Barcelona, Spain and São Paulo, Brazil, 1995–2003

<p>Abstract</p> <p>Background</p> <p>Large inequalities of mortality by most cancers in general, by mouth and pharynx cancer in particular, have been associated to behaviour and geopolitical factors. The assessment of socioeconomic covariates of cancer mortality may be relevant to a full comprehension of distal determinants of the disease, and to appraise opportune interventions. The objective of this study was to compare socioeconomic inequalities in male mortality by oral and pharyngeal cancer in two major cities of Europe and South America.</p> <p>Methods</p> <p>The official system of information on mortality provided data on deaths in each city; general censuses informed population data. Age-adjusted death rates by oral and pharyngeal cancer for men were independently assessed for neighbourhoods of Barcelona, Spain, and São Paulo, Brazil, from 1995 to 2003. Uniform methodological criteria instructed the comparative assessment of magnitude, trends and spatial distribution of mortality. General linear models assessed ecologic correlations between death rates and socioeconomic indices (unemployment, schooling levels and the human development index) at the inner-city area level. Results obtained for each city were subsequently compared.</p> <p>Results</p> <p>Mortality of men by oral and pharyngeal cancer ranked higher in Barcelona (9.45 yearly deaths per 100,000 male inhabitants) than in Spain and Europe as a whole; rates were on decrease. São Paulo presented a poorer profile, with higher magnitude (11.86) and stationary trend. The appraisal of ecologic correlations indicated an unequal and inequitably distributed burden of disease in both cities, with poorer areas tending to present higher mortality. Barcelona had a larger gradient of mortality than São Paulo, indicating a higher inequality of cancer deaths across its neighbourhoods.</p> <p>Conclusion</p> <p>The quantitative monitoring of inequalities in health may contribute to the formulation of redistributive policies aimed at the concurrent promotion of wellbeing and social justice. The assessment of groups experiencing a higher burden of disease can instruct health services to provide additional resources for expanding preventive actions and facilities aimed at early diagnosis, standardized treatments and rehabilitation.</p

Heterogeneous CPU/GPU co-execution of CFD simulations on the POWER9 architecture: Application to airplane aerodynamics

High fidelity Computational Fluid Dynamics simulations are generally associated with large computing requirements, which are progressively acute with each new generation of supercomputers. However, significant research efforts are required to unlock the computing power of leading-edge systems, currently referred to as pre-Exascale systems, based on increasingly complex architectures. In this paper, we present the approach implemented in the computational mechanics code Alya. We describe in detail the parallelization strategy implemented to fully exploit the different levels of parallelism, together with a novel co-execution method for the efficient utilization of heterogeneous CPU/GPU architectures. The latter is based on a multi-code co-execution approach with a dynamic load balancing mechanism. The assessment of the performance of all the proposed strategies has been carried out for airplane simulations on the POWER9 architecture accelerated with NVIDIA Volta V100 GPUs

Effect of CNFs content on the tribological behaviour of spark plasma sintering ceramic-CNFs composites

Alumina-carbon nanofibres (CNFs) and silicon carbide-CNFs nanocomposites with different volume fraction of CNFs (0-100vol.%) were obtained by spark plasma sintering. The effect of CNFs content on the tribological behaviour in dry sliding conditions on the ceramic-carbon nanocomposites has been investigated using the ball-on-disk technique against alumina balls. The wear rate of ceramic-CNFs nanocomposites decreases with CNFs increasing content. The friction coefficient of the Al 2O 3/CNFs and SiC/CNFs nanocomposites with high CNFs content was found to be significantly lower compared to monolithic Al 2O 3 and SiC due to the effect of CNFs and unexpectedly slightly lower than CNFs material. The main wear mechanism in the nanocomposite was abrasion of the ceramic and carbon components which act in the interface as a sort of lubricating media. The experimental results demonstrate that the addition of CNFs to the ceramic composites significantly reduces friction coefficient and wear rate, resulting in suitable materials for unlubricated tribological applications. © 2011.This work has been carried out with financial support of National Plan Projects MAT2006-01783 and MAT2007-30989-E and the Regional Project FICYT PC07-021. A. Borrell acknowledges the Spanish Ministry of Science and Innovation for her FPI Ph.D. grant. We would like to thank the people from Institute Technological of Materials (ITM) of the Polytechnic University of Valencia for helping us with the tribology experiments during A. Borrell's short stay in 2009.Borrell Tomás, MA.; Torrecillas, R.; Rocha, VG.; Fernandez, A.; Bonache Bezares, V.; Salvador Moya, MD. (2012). Effect of CNFs content on the tribological behaviour of spark plasma sintering ceramic-CNFs composites. Wear. 274:94-99. https://doi.org/10.1016/j.wear.2011.08.013S949927

Process-generated nanoparticles from ceramic tile sintering: Emissions, exposure and environmental release

Under a Creative Commons license.-- et al.The ceramic industry is an industrial sector in need of significant process changes, which may benefit from innovative technologies such as laser sintering of ceramic tiles. Such innovations result in a considerable research gap within exposure assessment studies for process-generated ultrafine and nanoparticles. This study addresses this issue aiming to characterise particle formation, release mechanisms and their impact on personal exposure during a tile sintering activity in an industrial-scale pilot plant, as a follow-up of a previous study in a laboratory-scale plant. In addition, possible particle transformations in the exhaust system, the potential for particle release to the outdoor environment, and the effectiveness of the filtration system were also assessed. For this purpose, a tiered measurement strategy was conducted. The main findings evidence that nanoparticle emission patterns were strongly linked to temperature and tile chemical composition, and mainly independent of the laser treatment. Also, new particle formation (from gaseous precursors) events were detected, with nanoparticles  87% efficiency in particle number concentrations removal.This work was supported by the European Commission FP7 (FP7-PEOPLE-2012-ITN) Marie Curie ITN project no. 315760 (HEXACOMM) and by the Spanish MINECO (PCIN-2015-173-C02-01) under the frame of SIINN, the ERA-NET for a Safe Implementation of Innovative Nanoscience and Nanotechnology, through SIINN-ERANET project CERASAFE (id.:16). Additional support was provided by LIFE projects AIRUSE (LIFE11 ENV/ES/584), CERAMGLASS (LIFE11 ENV/ES/560) and LASERFIRING (LIFE09 ENV/ES/435).Peer Reviewe

Surface coating on carbon nanofibers with alumina precursor by different synthesis routes

[EN] Alumina-reinforced carbon nanofiber nanocomposites were prepared using different routes; powders mixture, colloidal route and sol-gel process followed by spark plasma sintering (SPS). CNFs/xAl(2)O(3) (x = 10-50 vol.%) were prepared through nanopowders mixing in a high-energy attrition milling. The main limitations in the preparation of this kind of nanocomposites are related to the difficulty in obtaining materials with a homogeneous distribution of both phases and the different chemical nature of CNFs and Al(2)O(3), which causes poor interaction between them. A surface coating of CNFs by wet chemical routes with an alumina precursor is proposed as a very effective way to improve the interaction between CNFs and Al(2)O(3). An improvement of 50% in fracture strength was found for similar nanocomposite compositions when the surface coating was used. The improved mechanical properties of these nanocomposites are caused by stronger interaction between the CNFs and Al(2)O(3). Crown Copyright (C) 2010 Published by Elsevier Ltd. All rights reserved.This work has been carried out with financial support of National Plan Projects MAT2006-01783 and MAT2007-30989-E and the Regional Project FICYT PC07-021. A. Borrell, acknowledges the Spanish Ministry of Science and Innovation for Ph.D. grant.Borrell Tomás, MA.; Rocha, VG.; Torrecillas, R.; Fernandez, A. (2011). Surface coating on carbon nanofibers with alumina precursor by different synthesis routes. Composites Science and Technology. 71(1):18-22. https://doi.org/10.1016/j.compscitech.2010.09.011S182271

Process-generated nanoparticles from ceramic tile sintering : Emissions, exposure and environmental release

The ceramic industry is an industrial sector in need of significant process changes, which may benefit from innovative technologies such as laser sintering of ceramic tiles. Such innovations result in a considerable research gap within exposure assessment studies for process-generated ultrafine and nanoparticles. This study addresses this issue aiming to characterise particle formation, release mechanisms and their impact on personal exposure during a tile sintering activity in an industrial-scale pilot plant, as a follow-up of a previous study in a laboratory-scale plant. In addition, possible particle transformations in the exhaust system, the potential for particle release to the outdoor environment, and the effectiveness of the filtration system were also assessed. For this purpose, a tiered measurement strategy was conducted. The main findings evidence that nanoparticle emission patterns were strongly linked to temperature and tile chemical composition, and mainly independent of the laser treatment. Also, new particle formation (from gaseous precursors) events were detected, with nanoparticles A potential risk for nanoparticle and ultrafine particle release to the environment was also identified, despite the fact that the efficiency of the filtration system was successfully tested and evidenced a >87% efficiency in particle number concentrations removal. (C) 2016 The Authors. Published by Elsevier B.V.Peer reviewe